|
目 次
锻造
铁道车辆钩舌闭式模锻工艺的数值模拟研究....陈庆敏，孟凡响，李 丽，等 (1)TBM滚刀刀圈模锻成形仿真参数优化..........................................................麻成标 (7)
板料成形
AZ31镁合金板材连续挤压数值模拟与实验研究
........................................................................李智勇，裴久杨，郭丽丽，等 (15)核燃料中子吸收板生产核心技术研究与应用
........................................................................张 君，杨 建，陈永甲，等 (21)渐进成形工艺参数对 6061铝合金板材成形性能的影响
........................................................................王新太，王 进，顾 宁，等 (29)
某车型前门内板起皱问题研究和改进 ......................徐 肖，王 震，李 杭 (34)
基于匀质块排样方式的多尺寸板材下料算法...........向文欣，王宏旭，潘立武 (41)
基于数值模拟的铝合金板料自冲铆接成形................................................周 琦 (47)
模具温度对汽车 B柱变强度热成形零件过渡区的影响 ...........................黄超群 (52)
航空大型复杂蒙皮的拉伸成形技术 ..................唐 涛，李志强，门向南，等 (57)
特种成形
先进高强钢 U型件链模成形缺陷机理分析及影响因素研究
........................................................................李亚光，李大永，丁士超，等 (62)浅 L形环件对轧成形工艺 ...................................齐会萍，庞晓龙，李永堂，等 (72)关节轴承挤压成形工艺多目标优化设计...................辛亮亮，王秀梅，黄雄荣 (79)基于 Simufact筒形件强力旋压旋轮数量对成形质量的影响
........................................................................李凤刚，原 霞，郝晓华，等 (86)汽车转向轴齿磨削裂纹产生的机理及预防措施
........................................................................张义帅，孙红星，张 超，等 (92)
基于数值仿真的台阶型定位销冷镦成形工艺优化 ..................王 琳，王明强 (96)
含突变曲线异形环件轧制工艺.........................蒋起臣，陈 浩，冯吉威，等 (101)
模具
控制策略下热冲压模具升温传热仿真 ............陈伟业，周柯成，李 凯，等 (106)
连接板多工位级进模设计 .................................闫华军，陈宝杰，刘玉忠，等 (113)
2019年 第44卷 第7期（总第286期）（月刊）7月25日出版
责任编辑：魏 巍
目 次
装备与成套技术
基于 Workbench的一种增量滚压成形装置......................................................................丁明凯，高绪杰，殷继丽，等 (119)中间坯剪切挤压连接装置结构设计及运动仿真......................................................................陈宝杰，闫华军，姚云峰，等 (128)全自动汽车半轴生产线终锻上料机械手设计......................................................................吴孜越，李新星，都兴兴，等 (134)轧机双驱进给系统同步控制方法..............................................赵翱东，孙 俊 (139)
材料与成形性能
Zn作中间层的镁铝复合材料挤压成形微观组织与力学性能研究..............................................................................乔及森，李晓艳，夏宗辉 (144)初始组织对 Al-Cu-Mg-Zr合金热变形流变应力行为的影响..............................................................................董兆宇，柏国伟，傅定发 (150)挤压态Ti-46Al-(V，Cr，Ni)合金的高温变形行为......................................................................关 红，朱海峰，孔凡涛，等 (158)变形时效对 6061铝合金板材的组织和力学性能的影响......................................................................唐健江，王 嘉，刘嘉乐，等 (165)变形量对多道次拉拔和减径轧制 5056铝棒组织和力学性能的影响...............................................................................................张晓晖，谭驰高 (170)
理论与实验研究
基于主应力法和滑移线法求解圆棒料锥模拉拔力.....................................................................张 晗，赵 军，王 敏，等 (174)双频激振系统下带 V型槽棒料下料寿命模型..............................................................................化春键，任皓靖，陆云健 (177)
信息
《锻压技术》郑重声明 (14)AFDEX智能化金属成形模拟软件 (28)欢迎关注 “锻压技术杂志”微信公众号 (51)《锻压技术》读者信息反馈卡声明 (61)关于中国机械工程学会塑性工程分会发展会员的通知 (85)QC检测仪器网 (100)书讯 (127)《超高强钢热冲压工艺通用技术》等 4项锻压领域国家标准发布信息 (183)第十六届全国塑性工程学术年会暨第八届全球华人塑性技术研讨会通知 (184)
主管单位：中国机械工业联合会主办单位：北京机电研究所有限公司 中国机械工程学会塑性工程分会编辑出版：《锻压技术》编辑部主编：陆辛副主编：金红
编辑部主任：金红编辑部副主任：魏巍英文编辑：王秀凤（兼）广告设计：史志文编辑部地址：北京市海淀区学清路18号邮政编码：100083电话：（010）62920652 82415085传真：（010）62920652电子信箱：fst＠263.net（稿件）
hjshizhiwen@163.com（广告）网址：www.fstjournal.net印刷：北京科信印刷有限公司出版日期：每月25日国际标准连续出版物号：ISSN 1000-3940
CODEN: DUJID9国内统一连续出版物号：CN 11-1942/TG广告经营许可证：京海工商广字第0012号国内邮发代号：2—322总发行处：北京报刊发行局国内订阅：全国各地邮电局国内定价：20.00元国外邮发代号：BM5549国外总发行处：中国国际贸易总公司国外定价：10美元刊名商标注册证号：第7054460号
锻压技术网站锻压技术微信
Responsible Department: China Machinery Industry Federation Sponsor: Beijing Research Institute of Mechanical & Electrical Technology, BRIMET Society for Technology of Plasticity, CMES Edited by: Editorial Office of Forging & Stamping Technology Chief Editor: Lu Xin Vice Chief Editor: Jin Hong Address: No.18 Xueqing Road, Beijing, P.R.China Post Code: 100083 Tel:（010）62920652 82415085 Fax:（010）62920652 E-mail: fst@263.net hjshizhiwen@163.com Http://www.fstjournal.net Printed by: Beijing Kexin Printing Co., Ltd. Published Date: 25th Monthly Publication Number: ISSN 1000-3940 CN 11-1942/TG CODEN: DUJID9 Overseas Distributor: China International Book Trading Corporation Price: 10 USD
The journal resolutely resists all academic misconduct, once found, the paper will be withdrawn immediately.
DUANYA JISHU
FORGING & STAMPING TECHNOLOGY
CONTENTS
FORGING
Numerical simulation on closed die forging process for railway vehicleknuckle ............................Chen Qingmin，Meng Fanxiang，Li Li，et al(1) Optimization on simulation parameters for TBM disc cutter ring in die forging ....................................................................................Ma Chengbiao(7)
SHEET FORMING
Numerical simulation and experimental study on continuous extrusion of AZ31 magnesium alloy sheet................................................Li Zhiyong，Pei Jiuyang，Guo Lili，et al(15)
Research and application on core technology of nuclear fuel neutron absorption plate production.........................................Zhang Jun，Yang Jian，Chen Yongjia，et al(21)
Effect of incremental forming process parameters on formability of 6061aluminum alloy sheet ........Wang Xintai，Wang Jin，Gu Ning，et al(29) Research and improvement on wrinkling of front door inner panel for a certain vehicle......................................Xu Xiao，Wang Zhen，Li Hang(34) Blanking algorithm for multiple-size sheets based on homogeneous block layout..................................Xiang Wenxin，Wang Hongxu，Pan Liwu(41) Self-piercing riveting of aluminum alloy sheet based on numerical simulation ............................................................................................................Zhou Qi(47) Influence of die temperature on transition zone of hot stamping parts with variable strength for automotive B-pillar................. Huang Chaoqun (52) Stretch forming technology of aviation large and complex skin......................................Tang Tao，Li Zhiqiang，Men Xiangnan，et al(57)
SPECIAL FORMING
Research on defect mechanism and influential factors in chain-die forming for U-shaped part of advanced high strength steel.......................................Li Yaguang，Li Dayong，Ding Shichao，et al(62)
Pair rolling process of shallow L-shaped ring..................................Qi Huiping，Pang Xiaolong，Li Yongtang，et al(72) Multi-objective optimization design on extrusion process for joint bearing...............................Xin Liangliang，Wang Xiumei，Huang Xiongrong(79)
Influence of the number of power spinning wheels on forming quality for cylindrical parts based on Simufact........................................Li Fenggang，Yuan Xia，Hao Xiaohua，et al(86)
Mechanism and preventive measures on grinding cracks for automobile steering shaft tooth .............................Zhang Yishuai，Sun Hongxing，Zhang Chao，et al92)
Optimization on cold upsetting process for step positioning pin based on numerical simulation..............................Wang Lin，Wang Mingqiang(96)
25th
Vol.44 No.7 Jul. 2019
广告索引
Executive Editor: Wei Wei
CONTENTS 北京机电研究所有限公司-AFDEX（封面）
Rolling process for profiled rings with abrupt curve.......................................Jiang Qichen，Chen Hao，Feng Jiwei，et al(101)
DIE TECHNOLOGY
Heat transfer simulation of hot stamping die heating process under control strategy...........................Chen Weiye，Zhou Kecheng，Li Kai，et al(106) Multi-position progressive die design for connecting plate..................................Yan Huajun，Chen Baojie，Liu Yuzhong，et al(113)
EQUIPMENT & COMPLETE TECHNOLOGY
An incremental rolling equipment based on Workbench..............................................Ding Mingkai，Gao Xujie，Yin Jili，et al(119)
Structural design and motion simulation of shear extrusion connection device for intermediate blank..................................Chen Baojie，Yan Huajun，Yao Yunfeng，et al(128)
Design of loading manipulator in final forging for automobile half shaft automatic production line ..........................................Wu Ziyue，Li Xinxing，Du Xingxing，et al(134)
Synchronization control method for double-drive feeding system of rolling mill.....................................................................Zhao Aodong，Sun Jun(139)
MATERIAL & FORMING PERFORMANCE
Study on microstructure and mechanical properties of extrusion for magnesium-aluminum composite with Zn as intermediate layer....................................................Qiao Jisen，Li Xiaoyan，Xia Zonghui(144)
Influence of initial microstructures on rheology stress behavior during hot deformation for Al-Cu-Mg-Zr alloy .................................................Dong Zhaoyu，Bo Guowei，Fu Dingfa(150)
Hot deformation behavior of extruded Ti-46Al-(V，Cr，Ni) alloy.................................Guan Hong，Zhu Haifeng，Kong Fantao，et al(158)
Influence of deformation aging on microstructure and mechanical properties of 6061 aluminum alloy plate..........................................Tang Jianjiang，Wang Jia，Liu Jiale，et al(165)
Influences of deformation amount on microstructure and mechanical properties of 5056 aluminum bar in multi-pass drawing and reduced diameter rolling .......................................Zhang Xiaohui，Tan Chigao(170)
THEORY & EXPERIMENTAL RESEARCH
Solution to drawing force of conical die for round bar based on principal-stress method and slip-line method............................................Zhang Han，Zhao Jun，Wang Min，et al(174)
Blanking life model of V-groove bar based on dual-frequency excitation system................................Hua Chunjian，Ren Haojing，Lu Yunjian(177)
隔而固(青岛)振动控制有限公司（封二）辽阳锻压机床股份有限公司（封三）开封现代工业炉有限公司（封底）哈特贝尔（上海）贸易有限公司（彩插1）北京机电研究所有限公司（彩插2、3）湖北三环锻造有限公司（彩插4）中国锻压协会（彩插5）2019北京国际热处理展览会（彩插6）《锻压技术》读者信息反馈卡（彩插7、8）上海中沪电子技术研究设计所/上海中沪电子有限公司（彩侧）北京机电研究所有限公司（侧条）
|