|
目 次
主管单位：中国机械工业联合会主办单位：北京机电研究所有限公司 中国机械工程学会塑性工程分会编辑出版：《锻压技术》编辑部主编：陆辛副主编：金红
模具
基于数值模拟的汽车冲压模具轻量化研究....王 辉，刘莉滋，王海宝，等 (116)
摩擦与润滑
汽车前围板模具表面摩擦敏感区域的划分及优化设计..............................................................................符永宏，胡光耀，符 昊 (121)基于六西格玛与形态学矩阵的润滑系统结构设计......................................................................曹 磊，龚红英，李孟祥，等 (126)
材料与成形性能
20MnMoB结构钢调质冷锻后硬度变化规律分析
......................................................................姚源镠，胡成亮，赵 震，等 (131)车用铝合金 AA5182温热成形研究 ........................公丕昊，陈劼实，杨 磊 (136)内燃机用 IN718镍基合金热变形动态组织性能分析 ............................李青芬 (142)挤压态 ZK61M镁合金热压缩变形行为与本构方程建立
......................................................................陈祥龙，徐春国，秦思晓，等 (147)
理论与实验研究
轧制变形对建筑用 Al-Mn合金组织与性能的影响 ................................董素芹 (154)搅拌摩擦加工制备镁合金表面复合层的显微组织和力学性能......................................................................李天麒，闫原原，谢 辉，等 (162)30CrNi3MoVA钢的晶粒细化及组织均匀化研究..................叶玉娟，高全德 (169)
计算机应用
基于大数据的锻造生产过程模型的搭建与分析......................................................................邓盛彪，张宏涛，孙 勇，等 (174)利用 RBF神经网络预测反挤压连杆衬套过程中的挤压力......................................................................樊文欣，李志伟，李凤刚，等 (180)
信息
QC检测仪器网 (20) 欢迎关注“锻压技术杂志 ”微信公众号 (28) 《锻压技术》杂志敬告新老广告客户 (34) 《锻压技术》杂志入选《世界学术期刊学术影响力指数（WAJCI）年报》Q2区（81） “第十六届全国塑性工程学术年会”暨“第八届全球华人塑性技术研讨会”（104）关于召开 “2019年模锻技术培训及标准宣贯研讨会”的通知（第二轮）(120) 《锻压技术》郑重声明 (125) 《锻压技术》读者信息反馈卡声明 (146) 关于中国机械工程学会塑性工程分会发展会员的通知 (161)
编辑部主任：金红编辑部副主任：魏巍英文编辑：王秀凤（兼）广告设计：史志文编辑部地址：北京市海淀区学清路18号邮政编码：100083电话：（010）62920652 82415085传真：（010）62920652电子信箱：fst＠263.net（稿件）
hjshizhiwen@163.com（广告）网址：www.fstjournal.net印刷：北京科信印刷有限公司出版日期：每月25日国际标准连续出版物号：ISSN 1000-3940
CODEN: DUJID9国内统一连续出版物号：CN 11-1942/TG广告经营许可证：京海工商广字第0012号国内邮发代号：2—322总发行处：北京报刊发行局国内订阅：全国各地邮电局国内定价：20.00元国外邮发代号：BM5549国外总发行处：中国国际贸易总公司国外定价：10美元刊名商标注册证号：第7054460号
锻压技术网站锻压技术微信
Responsible Department: China Machinery Industry Federation Sponsor: Beijing Research Institute of Mechanical & Electrical Technology, BRIMET Society for Technology of Plasticity, CMES Edited by: Editorial Office of Forging & Stamping Technology Chief Editor: Lu Xin Vice Chief Editor: Jin Hong Address: No.18 Xueqing Road, Beijing, P.R.China Post Code: 100083 Tel:（010）62920652 82415085 Fax:（010）62920652 E-mail: fst@263.net hjshizhiwen@163.com Http://www.fstjournal.net Printed by: Beijing Kexin Printing Co., Ltd. Published Date: 25th Monthly Publication Number: ISSN 1000-3940 CN 11-1942/TG CODEN: DUJID9 Overseas Distributor: China International Book Trading Corporation Price: 10 USD
The journal resolutely resists all academic misconduct, once found, the paper will be withdrawn immediately.
DUANYA JISHU
FORGING & STAMPING TECHNOLOGY
CONTENTS
SUMMARY
Reliability technology of precision forging for aero-engine blade..........................................Wu Hanjiang，Zhang Fengshou，Yan Genpeng(1)
FORGING
Simulation of incremental rolling process for a new roller profile...........................................Yin Jili，Zhu Guangming，Ding Mingkai，et al(6) Process design on multi-stage cold upsetting and extruding for small casing.................................................Luo Jing，Yin Xiaoyan，Yin Junwen，et al(14)
Numerical simulation and technology practice of casting-forging integration liquid core forging for heavy ingot.................................................Zhao Ziwen，Cao Yanfei，Qin Zhuo，et al(21)
Optimization on forging process parameters and defect analysis for aluminum alloy control arm ..................Sun Weiling，Ding Jingen，Bian Yi，et al(29)
SHEET FORMING
Numerical simulation on multi-gripper flexible stretch forming process of sheet metal....................Tian Yonghui ，Zhao Kunmin ，Chen Liangyu (35)
SPECIAL FORMING
Influence of eccentric sleeve rotational speed on rotary forging of spiral bevel gears.........................Gao Yufan，Zhu Chundong，Zhu Xingyuan，et al(41) Optimization on process parameters of double-roller rotary forging for spiral bevel gear .............Wang Yingjun，Zhu Chundong，Gao Yufan，et al(47)
Numerical simulation analysis and optimization on double-roller rotary forging for large diameter and thin disc................................................Liu Xin，Zhu Chundong，Gao Yufan，et al(53)
Springback experiment of metal sheet in NC single-point progressive forming...................Jiang Zhihong，Peng Jie，Miao Zhongzhou，et al(58) Incremental forming limit and influencing factors for 1060 aluminum sheet.............................................Zhao Wei，Teng Peixiu，Zhan Yanran，et al(63) Optimization on ironing process parameters for cylindrical part based on grey correlation degree ................................................................Yuan Bo，Li Hui(69) Influence of roller number on quality of cylinder parts in roll extrusion forming...............................................Sun Hao，Zhang Baohong，Li Xubin，et al(73) Influence of spinning roller parameters on forming quality of anti-spinning tube part ................................. Liu Jilin，Tang Chuanyao，Fan Wenxin(82)
TUBE FORMING
Research on hydroforming loading path of tube with large diameter ratio based on uniform capacity change..........................................Wu Na，Wang Liandong，Wang Xiaodi，et al(86)
EQUIPMENT & COMPLETE TECHNOLOGY
Research on control system for direct drive electro-hydraulic servo die forging hammer.............................Li Geqiang，Ding Yinting，Feng Yong，et al(93)
Vol.44 No.5 25th May 2019
广告索引
Executive Editor: Shi Zhiwen
CONTENTS 隔而固(青岛)振动控制有限公司（封面）
Analysis on bifurcation and chaos behavior of mill rolls under piecewise symmetric nonlinear stiffness...........Peng Rongrong，Gong Changfen(99) Application of hydraulic stretcher in continuous extrusion machine TLJ400......................................................Zhang Jing，Fan Zhixin，Sun Haiyang(105) Coupling synchronous control method for multi-cylinder leveling system of rolling mill....................................................................................Zhang Hong(110)
DIE TECHNOLOGY
Research on lightweight of automobile stamping die based on numerical simulation..............................Wang Hui，Liu Lizi，Wang Haibao，et al(116)
FRICTION & LUBRICATION
Division and optimization design on friction sensitive region for automobile front plate die surface.............Fu Yonghong，Hu Guangyao，Fu Hao(121) Structural design on lubrication system based on Six Sigma and morphological matrix.........................Cao Lei，Gong Hongying，Li Mengxiang，et al(126)
MATERIAL & FORMING PERFORMANCE
Analysis on hardness variation of structural steel 20MnMoB for cold forging after quenching and tempering....................................Yao Yuanliu，Hu Chengliang，Zhao Zhen，et al(131)
Research on warm forming for AA5182 aluminum alloy used in automobile............................................................Gong Pihao，Chen Jieshi，Yang Lei(136) Analysis on dynamic microstructure properties in hot deformation for nickel base alloy IN718 used in engine.................................................Li Qingfen(142)
Hot compression deformation behavior of extruded ZK61M magnesium alloy and establishment of constitutive equation..................................Chen Xianglong，Xu Chunguo，Qin Sixiao，et al(147)
THEORY & EXPERIMENTAL RESEARCH
Influence of rolling deformation on microstructure and properties of Al-Mn alloy for building.........................................................................Dong Suqin(154)
Microstructure and mechanical properties of Mg alloy surface composite layer fabricated by friction stir processing..................................................Li Tianqi，Yan Yuanyuan，Xie Hui，et al(162)
Research on grain refinement and organization uniformity of 30CrNi3MoVA steel .......................................................................Ye Yujuan，Gao Quande(169)
COMPUTER APPLICATION
Construction and analysis on forging production process model based on big data...................Deng Shengbiao，Zhang Hongtao，Sun Yong，et al(174)
Prediction of extrusion force in backward extruding connecting rod bushing process by RBF neural network............................................Fan Wenxin，Li Zhiwei，Li Fenggang，et al(180)
湖北三环锻造有限公司（封二）辽阳锻压机床股份有限公司（封三）开封现代工业炉有限公司（封底）北京机电研究所有限公司-AFDEX（彩插1） 北京机电研究所有限公司（彩插2、3）2019北京国际热处理展览会（彩插4）中国锻压协会（彩插5）2019中国国际金属成形展览会（彩插6）《锻压技术》读者信息反馈卡（彩插7、8）上海中沪电子技术研究设计所/上海中沪电子有限公司（彩侧）北京机电研究所有限公司（侧条）
|