|
目 次
《铸造》第64卷第4期(总第461) 2015年4月10日出版
新材料·新工艺
添加Mn对高碳铬铁铸渗复合材料组织的影响……………………………………………郭军力 魏世忠 潘昆明299
稀土对20MnCrNi2Mo耐磨铸钢组织及力学性能的影响……………………………靳晓艳 计云萍 侯敬超 等303
铝合金铸件V法造型低压铸造新技术…………………………………………………吴 江 冯志军 李宇飞 等307
LSPSF工艺对Al-Si-2Fe合金中富铁相的影响………………………………………王言兵 汪丽君 杨湘杰 等313
计算机应用
马氏体不锈钢叶轮铸造工艺设计与优化………………………………………………黄宏军 曹 阳 王好强 等317
检测技术
基于超声波的球铁球化率快速检测系统………………………………………………刘 鹏 石德全 李 强 等321
应用技术
Sr对Mg-10Zn-4Al-0.3Mn合金显微组织和力学性能的影响…………………………………………罗晓航 许春香325
Al元素对ZZn-Al-Cu系合金组织和力学性能的影响…………………………………王宏健 司乃潮 刘光磊 等330
离心铸造碳钢-高铬铸铁复合管组织及性能研究………………………………………吴 伟 李艳霞 韩静涛 等336
一种单晶高温合金的高温抗氧化性能研究……………………………………………史振学 刘世忠 王效光 等339
内嵌式顺序抽芯滑块结构在压铸模具中的应用……………………………………………张正来 夏 天 范进桢343
一种RECo铬青铜熔炼质量控制要点…………………………………………………苏义祥 刘兴寿 陈改革 等346
SiC对C194铸态合金组织及性能的影响………………………………………………蔡 薇 廖钰敏 张 英 等349
低合金铁素体球墨铸铁的研制…………………………………………………………苟华强 雷 强 涂建平 等353
高韧度整体无损检测球铁件工艺设计…………………………………………………惠俊民 姜素丽 孙新明 等 356
自然时效对A356铝合金车轮性能的影响………………………………………………………………………代颖辉360
经验交流
铸铁件用树脂砂失效模式分析……………………………………………………………………………………刘增林363
大型静压造型线型砂的质量控制…………………………………………………………………………………郭 云368
注塑机定模板的铸造工艺………………………………………………………………刘光清 刘文川 魏晓伟 等372
消除列车车轮缩松的工艺实践…………………………………………………………郑志伟 陈荣发 陆华峰 等375
消除弯管铸件的渗漏和气孔缺陷的措施………………………………………………………于 雷 王晓海 赵 健378
铸造资讯
文献速报…………………………………………………………………………………………………………………381
专利摘要…………………………………………………………………………………………………………………383
行业动态：
东方恒略精铸向“大铸造”成功转型……………………………………………………………………324
包头铝业整合升级铸造铝合金生产线……………………………………………………………………324
国内首台全气密惰性气体保护自动浇钢车顺利投产……………………………………………………329
中国突破发动机单晶叶片核心技术………………………………………………………………………335
浙江“利用再生铝生产铸造铝合金锭”项目列入国家级示范工程……………………………………335
德国铝铸造企业在津建亚洲首个生产基地………………………………………………………………335
南通嘉城机械自主研发新型铸造材料……………………………………………………………………380
首批工业定制机器人青岛诞生……………………………………………………………………………380
Contents
Vol.64 No.4 Gen. Issue No. 461 Apr. 10，2015
New Materials & New Techniques
Effect of Mn Addition on Structure Property of High Carbon Ferrochrome Cast-Infiltrated Composite Materials
……………………………………………………………………………GUO Jun-li, WEI Shi-zhong, PAN Kun-ming299
Effect of Rare Earth on Microstructure and Mechanical Properties of 20MnCrNi2Mo Wear-Resistant Cast Steel
…………………………………………………………………………JIN Xiao-yan, JI Yun-ping, HOU Jing-chao, et al303
New Technology of V-Process Molding Low Pressure Casting Aluminum Alloy Castings
…………………………………………………………………………………WU Jiang, FENG Zhi-jun, LI Yu-fei, et al307
Effect of LSPSF Treatment on Iron Intermetallic Phases of Al-Si-2Fe Alloys
…………………………………………………………………WANG Yan-bing, WANG Li-jun, YANG Xiang-jie, et al313
Computer Application
Casting Process Design and Optimization of Martensite Stainless Steel Pumping Impeller
…………………………………………………………………HUANG Hong-jun, CAO Yang, WANG Hao-qiang, et al317
Test Technology
System for Testing the Spheroidization Rate of Ductile Iron Based on Ultrasonic Wave
……………………………………………………………………………………LIU Peng, SHI De-quan, LI Qiang, et al321
Application Technology
Effects of Sr on the Microstructure and Mechanical Properties of Mg-10Zn-4Al-0.3Mn Alloy
……………………………………………………………………………………………LUO Xiao-hang, XU Chun-xiang325
Effect of Aluminium Element on Microstructures and Mechanical Properties of ZZn-Al-Cu Casting Alloy
………………………………………………………………………WANG Hong-jian, SI Nai-chao, LIU Guang-lei, et al330
Research on Microstructure and Properties of Clad Pipe with Low Carbon/High Chromium Cast Iron Produced by
Centrifugal Casting……………………………………………………………WU Wei, LI Yan-xia, HAN Jing-tao, et al336
Study on Oxidation Resistance of a Single Crystal Superalloy at High Temperature
…………………………………………………………………SHI Zhen-xue, LIU Shi-zhong, WANG Xiao-guang, et al339
Application of Embedded Sequential Core-Pulling Slider Structure to Die-Casting Die
……………………………………………………………………………ZHANG Zheng-lai，XIA Tian，FAN Jin-zhen343
Key Points of Melting Quality Control of RECo-Chromium Bronze…SU Yi-xiang, LIU Xing-shou, CHEN Gai-ge, et al346
Effects of SiC on Microstructure and Properties of C194 As-Cast Alloy…CAI Wei, LIAO Yu-min, ZHANG Ying, et al349
Development of Low Alloy Ferrite Ductile Iron……………………GOU Hua-qiang，LEI Qiang，TU Jian-ping，et al353
High Tenacity Whole Nondestructive Testing Technology Design of Ductile Iron Casting
………………………………………………………………………HUI Jun-min, JIANG Su-li, SUN Xin-ming，et al356
Influence of Natural Aging on the Performance of A356 Aluminium Alloy Wheel…………………………DAI Ying-hui360
Experience Exchange
Analysis on the Failure Modes of Resin Sands Used in Iron Casting Parts…………………………………LIU Zeng-lin363
Quality Control of Molding Sand in Large Static Pressure Molding Line………………………………………GUO Yun368
Casting Process of Injection Molding Machine Fixed Die Plate
……………………………………………………………………LIU Guang-qing, LIU Wen-chuan, WEI Xiao-wei, et al372
Process Practice of Eliminate Dispersed Shrinkage of Train Wheel
………………………………………………………………………ZHEN Zhi-wei, CHEN Rong-fa, LU Hua-feng, et al375
Measures to Remove Leakage and Blowhole Defects of Elbow Pipe……………YU Lei, WANG Xiao-hai, ZHAO Jian378
|