|
2014年第10期
论文广场
叶轮背叶片对离心泵内部流场的影响 王银冰 王晓枫 刘文辉
Influence of Back Blades on Flow Field in Centrifugal Pump
小孔在压力容器中的设计与应用 蒋文荣 李业勤 单新华
Design and Application of Hole in Pressure Vessel
超压低温绝热液氧容器的开发与研制 赵永琪 朱兴元 陈红梅 郭东伟
Development and Research of Overpressure Cryogenic Liquid Oxygen Vessel
实心焊丝熔化极气体保护焊在压力容器中的工艺研究 王书华 杜永勤 祝晓辉
Study on Process of Solid Wire GMAW in Pressure Vessels
整体多层夹紧式氨合成塔外壳的研制 陈丽莉 何玉源 杨连红
Development of Integrated Multilayer Stepped Up Type of Shell of Ammonia Synthesis Tower
管壳式换热器壳侧外导流筒结构设计与工程应用 杜明 陈建文 惠宁 芦存财 李海燕
Structure Design and Project Application of Heat Exchanger with Distributor Belt
基于ANSYS Workbench 压力容器开孔处应力强度比较 季雪平 吕浩强 季雪娟
Compare Stress Intensity on Different Position of Hole Based on ANSYS WORKBENCH
JZJ5281GYQ型液化气体运输车的设计 李仁德 王忠成 王珂 王永斌 林丽华 刘俊波
Design for Liguifide Gas Vehicle(JZJ5281GYQ)
LF7-2与LF13-1油田原油脱水工艺对比研究 辛显康 王鹏 施振东 李东燕 田胜春
The Comparative Study of LF7-2 and LF13-1 Crude Oil Dehydration Technology
技术交流
汽水混合器开裂原因分析及改进措施 陈行易
Steam-condensate Mixer Cracking Analysis and Improvements
硫回收装置中夹套管的配管设计及管件选用原则 张慧颖
Jacketed Piping Design and Pipe Fittings Selection Principles of Sulfur Recovery Unit
环玛湖凹陷西环带钻井提速技术的应用 莒拉提·斯拉木 谢泽明 卡依萨尔 张锐
Ring Xihuan With Application of Drilling Speed Technology Marjorie Lake Depression
故障诊断
风诱导塔设备共振分析及处理 秦维彦
Wind Induced Resonance Tower Equipment Analysis and Processing
油田企业中电气设备常见故障及解决措施 周鹏飞
Introduction to Electrical Equipment in Oil Field Enterprise Common Failures and Solutions
压缩机组裂纹原因分析及处理措施 王佳 穆佳成
Crack Reason Analysis and Handling Measures of Compressor
TOFD用于检测埋藏缺陷的优越性 巴特德力格 朱红军
Superiority of TOFD in Detection of Buried Defects
某热电厂锅炉过热器连续爆管原因分析及解决措施 赵晓强 任恒昌 朱焱松 龚亚军
Analysis on Reasons of Continuous Detonation of Boiler Superheater and Solution
腐蚀防护
油气管道防腐施工质量影响因素及控制 罗喜
Influencing Factors and Control of Oil and Gas Pipeline’S Auti-Corrosion Quality
硫铵装置316L不锈钢管线开裂原因分析及焊接 王立波
Reason Analysis and Welding Stainless Steel Pipe Cracking Device 316L Ammonium Sulfate
油气管道安装与运行中的防腐蚀 邢贵先
Oil and Gas Pipelines Installation and Corrosion Protection
安全密封
某石化加氢裂化反应器安全分析及运行风险评估 苏保齐
Safety Analysis and Risk Evaluation of Hydrocracking Reactors in a Petrochemical Plant
机械密封失效原因分析及应对措施 徐良安 王矿宾 李磊
Analysis on failure Of Mechanical Seal and Improvement Measures
节能减排
工业汽轮机拖动工程关键问题及解决方法 王朝雄 冒咏秋
Key Methods of Steam Turbine Driving System in Heavy Industry
工业厂房除尘系统设计要点分析 余道腾 李瑞涛
Dust Removal System Design of Industrial Buildings
维修改造
输气管道工程供配电技术相关问题探讨 杨志 杨席川 高林宏
Gas Transmission Pipeline Engineering Technical Problems Related to Power Supply and Distribution System
DW-7.6/(22.5-39) 压缩机轴头油泵联轴器改进 王刚 沈婕
DW-7.6 / (22.5-39) Reciprocating Compressor Pump Coupling Improvements
螺杆泵安全阀未起跳原因分析及改进 贾严刚
Cause Analysis Improvement of Why Screw Pump Relief Valve Does Not Jump and Matters Needing Attention
长输管道工程线路优化设计探讨 吴科 胡安鑫
Design Optimization of Long Distance Pipeline Project Related Question Discussion
KDA系列输油泵定位轴承温度异常分析处理 陈作林 郑祖武
Analysis and Treatment of Abnormal KDA Pump Series Locating Bearing Temperature
|