TMS1000非接触测量系统

With LIMAB non contact laser measurement system it's possible to nearly anywhere in production measure thickness, width and length of wood pieces. Measurement is done automatically, under engthwise movement, in one or more measuring tracks with 1/10 of a millimetre accuracy. Length is measured by means of counting pulses from an encoder giving an accuracy of typically +-10mm, epending on mechanical conveyor conditions.On the system PC alarm limits for upper and lower values can easily be keyed in. One can also specify max allowed extension for out of spec condition before alarm output activates. This means that the operator immediately gets alerted when a board is e.g. to thin and should not be glued. The software displays the profile of each board graphically. Each production batch is statistically evaluated, the result telling how many pieces are ok, to thin, to narrow, to short and so on. In a dimensional table all products with specific data can easily be keyed in and then chosen for each new run. Data can continously, and/or after every batch be transferred to external PLC or control system.

对于LIMAB公司的非接触测量系统，它几乎可以在生产过程中的任何地方对木材进行厚度、宽度和长度测量。测量是自动进行的，

Technical data PreciCura laser sensors

Advanced triangulation sensor with DSP, Digital Signal Processor, high resolution CCD-array and precision optics. The sensors are in hardware exactly syncronise to eliminate measurement errors caused by vibrations and bumps. They have built in CAN-Bus, which enables fast data transfer but also simplifies installation. Measurement range 200mm Stand off 100mm Repeting accuracy ±0,05mm Measurement frequency 800Hz Laser class 2 ( 1mW laser) Protection class IP65 Size 162 x 108 x 42mm

The system consists of
2pcs/4pcs/6pcs or more Precicura's (2pcs/track thickness and width)