 |
| S30-HI
鞋跟沖击试验机
HEEL INPACT TESTER 試驗高跟鞋之鞋跟抗衝擊能力，試驗時，衝擊之能量，逐次增加，直到鞋跟破裂，讀取衝擊指數。 This test is used to determine the endurance of heel of ladies' shoe to receive the occasional heavy blows during wear. A heel, clamped with the tip uppermost and the stem approximately vertical, is subjected repeatedly measured from a pendulum striker. The energy of the blows increasing successively until the heel fails. 標準依據 Produce Spec：BS-5131 各項參數Instruction： 容量 Capacity:0~18.3J（13.5ft-lb），最小讀數0.68J（0.50ft-lb） 擺臂 Impact Shaft:Φ25mm 水平時擺垂之能量Horizontally Holding Moment of Pendulum:17.3N-m（12.7ft-lb） 沖錘 Pendulum Bob:Φ108mm 厚49.2mm (thickness) 沖錘圓心至軸心 Distance Between the Center of Bob and heCenter of Hub:432mm 沖刃 Striker Head (W*D*L): 25*6*35mm 圓角半徑 3mm(radius) 試件座可調整範圍Adjustable Range of Base Clamp: 高度~25mm(H)，角度0°~45°(angle) 體積 Dimension(W*D*H):63*40*105cm 重量 Weight:101kg |